r1#sh run
Building configuration...

Current configuration : 2118 bytes
!
! Last configuration change at 09:46:53 UTC Thu Dec 12 2019
!
version 15.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname r1
!
boot-start-marker
boot-end-marker
!
!
enable secret 5 $1$y/yH$QEtGyGetOk.AbJNvw0C000
!
no aaa new-model
!
!
!
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
multilink bundle-name authenticated
!
cts logging verbose
!
!
license udi pid CISCO1941/K9 sn FCZ2125B0FA
!
!
!
redundancy
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
 no ip address
 shutdown
!
interface GigabitEthernet0/0
 no ip address
 duplex auto
 speed auto
!
interface GigabitEthernet0/0.10
 description gateway for vlan 10
 encapsulation dot1Q 10
 ip address 192.168.10.1 255.255.255.0
!
interface GigabitEthernet0/0.20
 description gateway for vlan 20
 encapsulation dot1Q 20
 ip address 192.168.20.1 255.255.255.0
!
interface GigabitEthernet0/0.30
 description gateway for vlan 30
 encapsulation dot1Q 30
 ip address 192.168.30.1 255.255.255.0
!
interface GigabitEthernet0/0.99
 description gateway for vlan 99
 encapsulation dot1Q 99
 ip address 192.168.99.1 255.255.255.0
!
interface GigabitEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/0/0
 description connection to r2
 bandwidth 512
 ip address 1.1.1.1 255.255.255.252
!
interface Serial0/0/1
 no ip address
 shutdown
 clock rate 2000000
!
router ospf 1
 network 1.1.1.0 0.0.0.3 area 0
 network 192.168.10.0 0.0.0.255 area 0
 network 192.168.20.0 0.0.0.255 area 0
 network 192.168.30.0 0.0.0.255 area 0
 network 192.168.99.0 0.0.0.255 area 0
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
control-plane
!
!
banner motd ^CC Unauthorised access is strictly prohibited^C
!
line con 0
 password 7 030752180500
 logging synchronous
 login
line aux 0
line 2
 no activation-character
 no exec
 transport preferred none
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
 stopbits 1
line vty 0 4
 password 7 13061E010803
 logging synchronous
 login
 transport input none
!
scheduler allocate 20000 1000
!
end

r1#
r1#sh run
Building configuration...

Current configuration : 2118 bytes
!
! Last configuration change at 09:46:53 UTC Thu Dec 12 2019
!
version 15.4
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname r1
!
boot-start-marker
boot-end-marker
!
!
enable secret 5 $1$y/yH$QEtGyGetOk.AbJNvw0C000
!
no aaa new-model
!
!
!
!
!
!
!
!
!
!
!
!
!
!
no ip domain lookup
ip cef
no ipv6 cef
multilink bundle-name authenticated
!
cts logging verbose
!
!
license udi pid CISCO1941/K9 sn FCZ2125B0FA
!
!
!
redundancy
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
 no ip address
 shutdown
!
interface GigabitEthernet0/0
 no ip address
 duplex auto
 speed auto
!
interface GigabitEthernet0/0.10
 description gateway for vlan 10
 encapsulation dot1Q 10
 ip address 192.168.10.1 255.255.255.0
!
interface GigabitEthernet0/0.20
 description gateway for vlan 20
 encapsulation dot1Q 20
 ip address 192.168.20.1 255.255.255.0
!
interface GigabitEthernet0/0.30
 description gateway for vlan 30
 encapsulation dot1Q 30
 ip address 192.168.30.1 255.255.255.0
!
interface GigabitEthernet0/0.99
 description gateway for vlan 99
 encapsulation dot1Q 99
 ip address 192.168.99.1 255.255.255.0
!
interface GigabitEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/0/0
 description connection to r2
 bandwidth 512
 ip address 1.1.1.1 255.255.255.252
!
interface Serial0/0/1
 no ip address
 shutdown
 clock rate 2000000
!
router ospf 1
 network 1.1.1.0 0.0.0.3 area 0
 network 192.168.10.0 0.0.0.255 area 0
 network 192.168.20.0 0.0.0.255 area 0
 network 192.168.30.0 0.0.0.255 area 0
 network 192.168.99.0 0.0.0.255 area 0
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
!
control-plane
!
!
banner motd ^CC Unauthorised access is strictly prohibited^C
!
line con 0
 password 7 030752180500
 logging synchronous
 login
line aux 0
line 2
 no activation-character
 no exec
 transport preferred none
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
 stopbits 1
line vty 0 4
 password 7 13061E010803
 logging synchronous
 login
 transport input none
!
scheduler allocate 20000 1000
!
end

r1#sh ip int bri
Interface                  IP-Address      OK? Method Status                Protocol
Embedded-Service-Engine0/0 unassigned      YES unset  administratively down down
GigabitEthernet0/0         unassigned      YES unset  up                    up  
GigabitEthernet0/0.10      192.168.10.1    YES manual up                    up  
GigabitEthernet0/0.20      192.168.20.1    YES manual up                    up  
GigabitEthernet0/0.30      192.168.30.1    YES manual up                    up  
GigabitEthernet0/0.99      192.168.99.1    YES manual up                    up  
GigabitEthernet0/1         unassigned      YES unset  administratively down down
Serial0/0/0                1.1.1.1         YES manual up                    up  
Serial0/0/1                unassigned      YES unset  administratively down down
r1#sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       a - application route
       + - replicated route, % - next hop override

Gateway of last resort is 1.1.1.2 to network 0.0.0.0

O*E2  0.0.0.0/0 [110/1] via 1.1.1.2, 00:11:06, Serial0/0/0
      1.0.0.0/8 is variably subnetted, 2 subnets, 2 masks
C        1.1.1.0/30 is directly connected, Serial0/0/0
L        1.1.1.1/32 is directly connected, Serial0/0/0
      172.16.0.0/32 is subnetted, 3 subnets
O IA     172.16.60.1 [110/196] via 1.1.1.2, 00:11:06, Serial0/0/0
O IA     172.16.61.1 [110/196] via 1.1.1.2, 00:11:06, Serial0/0/0
O IA     172.16.62.1 [110/196] via 1.1.1.2, 00:11:06, Serial0/0/0
      192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.10.0/24 is directly connected, GigabitEthernet0/0.10
L        192.168.10.1/32 is directly connected, GigabitEthernet0/0.10
      192.168.20.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.20.0/24 is directly connected, GigabitEthernet0/0.20
L        192.168.20.1/32 is directly connected, GigabitEthernet0/0.20
      192.168.30.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.30.0/24 is directly connected, GigabitEthernet0/0.30
L        192.168.30.1/32 is directly connected, GigabitEthernet0/0.30
      192.168.99.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.99.0/24 is directly connected, GigabitEthernet0/0.99
L        192.168.99.1/32 is directly connected, GigabitEthernet0/0.99
r1#sh vlan
% Ambiguous command:  "sh vlan"
r1#sh vlan
% Ambiguous command:  "sh vlan "
r1#sh vlan bri
% Ambiguous command:  "sh vlan bri"
r1#sh ethterchannel sum
         ^
% Invalid input detected at '^' marker.

r1#sh etherchannel sum
           ^
% Invalid input detected at '^' marker.

r1#sh vtp stat
VTP Version                     : 2
Configuration Revision          : 0
Maximum VLANs supported locally : 20
Number of existing VLANs        : 5
VTP Operating Mode              : Server
VTP Domain Name                 :
VTP Pruning Mode                : Disabled
VTP V2 Mode                     : Disabled
VTP Traps Generation            : Disabled
MD5 digest                      : 0xBF 0x86 0x94 0x45 0xFC 0xDF 0xB5 0x70
Configuration last modified by 0.0.0.0 at 0-0-00 00:00:00
Local updater ID is 192.168.10.1 on interface Gi0/0.10 (first interface found)
r1#