R3#sh run
Building configuration...

Current configuration : 2431 bytes
!
! Last configuration change at 10:11:43 UTC Thu Mar 29 2018
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R3
!
boot-start-marker
boot-end-marker
!
!
enable secret 5 $1$Y1U3$8og20koJ8dRUpwYsx6MZq/
!
no aaa new-model
!
ip cef
!
!
!
!
!
!
no ip domain lookup
ip domain name East.com
ipv6 unicast-routing
ipv6 cef
multilink bundle-name authenticated
!
!
!
!
license udi pid CISCO2901/K9 sn FCZ182291MB
!
!
username user privilege 15 password 0 cisco
!
!
!
!
!
!
interface Tunnel0
 ip address 172.16.1.2 255.255.255.252
 tunnel source Serial0/0/1
 tunnel destination 209.165.200.225
!
interface Embedded-Service-Engine0/0
 no ip address
 shutdown
!
interface GigabitEthernet0/0
 no ip address
 duplex auto
 speed auto
 pppoe enable group global
 pppoe-client dial-pool-number 1
!
interface GigabitEthernet0/1
 description R3 to S3
 ip address 192.168.3.1 255.255.255.0
 ip nat inside
 ip virtual-reassembly in
 duplex auto
 speed auto
 ipv6 address FE80::3 link-local
 ipv6 address 2001:DB8:ACAD:3::1/64
 ipv6 eigrp 1
 ipv6 traffic-filter LIMIT_ACCESS in
!
interface Serial0/0/0
 no ip address
 shutdown
 clock rate 2000000
!
interface Serial0/0/1
 ip address 209.165.200.229 255.255.255.252
 ip nat outside
 ip virtual-reassembly in
 ipv6 address FE80::3 link-local
 ipv6 address 2001:DB8:ACAD:B::1/64
 ipv6 eigrp 1
!
interface Dialer1
 mtu 1492
 ip address negotiated
 encapsulation ppp
 dialer pool 1
 ppp authentication chap callin
 ppp chap hostname Cust1
 ppp chap password 0 ciscopppoe
!
router bgp 65030
 bgp log-neighbor-changes
 network 192.168.3.0
 neighbor 172.16.1.1 remote-as 65010
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip nat inside source list 3 interface Serial0/0/1 overload
ip route 0.0.0.0 0.0.0.0 Serial0/0/1
ip route 0.0.0.0 0.0.0.0 Tunnel0
ip route 0.0.0.0 0.0.0.0 Dialer1
!
access-list 3 permit 192.168.3.0 0.0.0.255
ipv6 router eigrp 1
 eigrp router-id 3.3.3.3
!
!
!
!
ipv6 access-list LIMIT_ACCESS
 deny icmp 2001:DB8:ACAD:3::/64 any
!
control-plane
!
!
banner motd ^C
Unauthorized access is strictly prohibited
^C
!
line con 0
 password cisco
 login
line aux 0
line 2
 no activation-character
 no exec
 transport preferred none
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
 stopbits 1
line vty 0 4
 login local
 transport input ssh
!
scheduler allocate 20000 1000
!
end

R3#sh ip int brief
Interface                  IP-Address      OK? Method Status                Protocol
Embedded-Service-Engine0/0 unassigned      YES unset  administratively down down
GigabitEthernet0/0         unassigned      YES unset  up                    up  
GigabitEthernet0/1         192.168.3.1     YES manual up                    up  
Serial0/0/0                unassigned      YES unset  administratively down down
Serial0/0/1                209.165.200.229 YES manual up                    up  
Dialer1                    10.0.0.1        YES IPCP   up                    up  
NVI0                       192.168.3.1     YES unset  up                    up  
Tunnel0                    172.16.1.2      YES manual up                    up  
Virtual-Access1            unassigned      YES unset  up                    up  
Virtual-Access2            unassigned      YES unset  up                    up  
R3#sh ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is 0.0.0.0 to network 0.0.0.0

S*    0.0.0.0/0 is directly connected, Dialer1
                is directly connected, Tunnel0
                is directly connected, Serial0/0/1
      10.0.0.0/32 is subnetted, 2 subnets
C        10.0.0.1 is directly connected, Dialer1
C        10.0.0.254 is directly connected, Dialer1
      172.16.0.0/16 is variably subnetted, 2 subnets, 2 masks
C        172.16.1.0/30 is directly connected, Tunnel0
L        172.16.1.2/32 is directly connected, Tunnel0
      192.168.3.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.3.0/24 is directly connected, GigabitEthernet0/1
L        192.168.3.1/32 is directly connected, GigabitEthernet0/1
      209.165.200.0/24 is variably subnetted, 2 subnets, 2 masks
C        209.165.200.228/30 is directly connected, Serial0/0/1
L        209.165.200.229/32 is directly connected, Serial0/0/1
R3#sh ipv6 int brief
Em0/0                  [administratively down/down]
    unassigned
GigabitEthernet0/0     [up/up]
    unassigned
GigabitEthernet0/1     [up/up]
    FE80::3
    2001:DB8:ACAD:3::1
Serial0/0/0            [administratively down/down]
    unassigned
Serial0/0/1            [up/up]
    FE80::3
    2001:DB8:ACAD:B::1
Dialer1                [up/up]
    unassigned
NVI0                   [up/up]
    unassigned
Tunnel0                [up/up]
    unassigned
Virtual-Access1        [up/up]
    unassigned
Virtual-Access2        [up/up]
    unassigned
R3#sh ipv6 route
IPv6 Routing Table - default - 8 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
       B - BGP, R - RIP, I1 - ISIS L1, I2 - ISIS L2
       IA - ISIS interarea, IS - ISIS summary, D - EIGRP, EX - EIGRP external
       ND - ND Default, NDp - ND Prefix, DCE - Destination, NDr - Redirect
       O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
       ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
D   2001:DB8:ACAD:1::/64 [90/2684416]
     via FE80::2, Serial0/0/1
D   2001:DB8:ACAD:2::/64 [90/2809856]
     via FE80::2, Serial0/0/1
C   2001:DB8:ACAD:3::/64 [0/0]
     via GigabitEthernet0/1, directly connected
L   2001:DB8:ACAD:3::1/128 [0/0]
     via GigabitEthernet0/1, receive
D   2001:DB8:ACAD:A::/64 [90/2681856]
     via FE80::2, Serial0/0/1
C   2001:DB8:ACAD:B::/64 [0/0]
     via Serial0/0/1, directly connected
L   2001:DB8:ACAD:B::1/128 [0/0]
     via Serial0/0/1, receive
L   FF00::/8 [0/0]
     via Null0, receive
R3#sh ipv6 eigrp topology
EIGRP-IPv6 Topology Table for AS(1)/ID(3.3.3.3)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
       r - reply Status, s - sia Status

P 2001:DB8:ACAD:A::/64, 1 successors, FD is 2681856
        via FE80::2 (2681856/2169856), Serial0/0/1
P 2001:DB8:ACAD:1::/64, 1 successors, FD is 2684416
        via FE80::2 (2684416/2172416), Serial0/0/1
P 2001:DB8:ACAD:B::/64, 1 successors, FD is 2169856
        via Connected, Serial0/0/1
P 2001:DB8:ACAD:2::/64, 1 successors, FD is 2809856
        via FE80::2 (2809856/2297856), Serial0/0/1
P 2001:DB8:ACAD:3::/64, 1 successors, FD is 28160
        via Connected, GigabitEthernet0/1

R3#sh ipv6 eigrp neighbors
EIGRP-IPv6 Neighbors for AS(1)
H   Address                 Interface              Hold Uptime   SRTT   RTO  Q  Seq
                                                   (sec)         (ms)       Cnt Num
1   Link-local address:     Se0/0/1                  13 01:17:52   15   100  0  13
    FE80::2
R3#