R1#show running-config
Building configuration...

Current configuration : 2032 bytes
!
! Last configuration change at 14:49:32 UTC Mon May 20 2019
!
version 15.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
!
!
!
!
!
!
!
!
!
!
!
!
!
ip cef
ipv6 unicast-routing
ipv6 cef
multilink bundle-name authenticated
!
!
cts logging verbose
!
!
license udi pid CISCO1941/K9 sn FCZ2125B0FA
!
!
!
redundancy
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
 no ip address
 shutdown
!
interface GigabitEthernet0/0
 ip address 192.168.110.1 255.255.255.0
 duplex auto
 speed auto
 ipv6 address FE80::1 link-local
 ipv6 address 2001:DB8:ACAD:110::1/64
!
interface GigabitEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial0/0/0
 bandwidth 128000
 ip address 192.198.9.1 255.255.255.252
 ipv6 address FE80::1 link-local
 ipv6 address 2001:DB8:ACAD:90::1/64
 clock rate 64000
!
interface Serial0/0/1
 no ip address
 shutdown
 clock rate 2000000
!
!
router eigrp dual-stack
 !
 address-family ipv4 unicast autonomous-system 101
  !
  af-interface GigabitEthernet0/0
   authentication mode hmac-sha-256 secret -2
   authentication key-chain named-r1-chain
   passive-interface
  exit-af-interface
  !
  af-interface Serial0/0/0
   authentication mode hmac-sha-256 secret -2
   authentication key-chain named-r1-chain
   passive-interface
  exit-af-interface
  !
  topology base
  exit-af-topology
  network 192.168.9.0
  network 192.168.110.0
  eigrp router-id 1.1.1.1
 exit-address-family
!
!
router eigrp 1
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
ipv6 router eigrp 101
 eigrp router-id 1.1.1.1
!
ipv6 router eigrp 1
 eigrp router-id 1.1.1.1
!
!
!
!
control-plane
!
!
!
line con 0
 logging synchronous
line aux 0
line 2
 no activation-character
 no exec
 transport preferred none
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
 stopbits 1
line vty 0 4
 login
 transport input none
!
scheduler allocate 20000 1000
!
end

R1#show ip int bri
Interface                  IP-Address      OK? Method Status                Protocol
Embedded-Service-Engine0/0 unassigned      YES unset  administratively down down
GigabitEthernet0/0         192.168.110.1   YES manual up                    up
GigabitEthernet0/1         unassigned      YES unset  administratively down down
Serial0/0/0                192.198.9.1     YES manual up                    up
Serial0/0/1                unassigned      YES unset  administratively down down
R1#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       a - application route
       + - replicated route, % - next hop override

Gateway of last resort is not set

      192.168.110.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.110.0/24 is directly connected, GigabitEthernet0/0
L        192.168.110.1/32 is directly connected, GigabitEthernet0/0
      192.198.9.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.198.9.0/30 is directly connected, Serial0/0/0
L        192.198.9.1/32 is directly connected, Serial0/0/0
R1#show ipv6 int bri
Em0/0                  [administratively down/down]
    unassigned
GigabitEthernet0/0     [up/up]
    FE80::1
    2001:DB8:ACAD:110::1
GigabitEthernet0/1     [administratively down/down]
    unassigned
Serial0/0/0            [up/up]
    FE80::1
    2001:DB8:ACAD:90::1
Serial0/0/1            [administratively down/down]
    unassigned
R1#show ipv6 route
IPv6 Routing Table - default - 5 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
       B - BGP, R - RIP, I1 - ISIS L1, I2 - ISIS L2
       IA - ISIS interarea, IS - ISIS summary, D - EIGRP, EX - EIGRP external
       ND - ND Default, NDp - ND Prefix, DCE - Destination, NDr - Redirect
       O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2
       ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2, a - Application
C   2001:DB8:ACAD:90::/64 [0/0]
     via Serial0/0/0, directly connected
L   2001:DB8:ACAD:90::1/128 [0/0]
     via Serial0/0/0, receive
C   2001:DB8:ACAD:110::/64 [0/0]
     via GigabitEthernet0/0, directly connected
L   2001:DB8:ACAD:110::1/128 [0/0]
     via GigabitEthernet0/0, receive
L   FF00::/8 [0/0]
     via Null0, receive
R1#show ip bgp neighbors
% BGP not active

R1#show ip bgp summary
% BGP not active

R1#