JQuiz Instructions

Which routing protocol has administrative distance of 110
1. OSPF
2. EIGRP
3. RIPv1
4. RIPv2
Which key stroke will return a Telnet session back to an originating routers console?
1. Ctrl + Z
2. Ctrl + A
3. Ctrl +Shift + 6, then X
4. Ctrl +C
If you want to delete the startup-config on a 2900 switch, what command do you use?
1. erase startup-config
2. delete startup-config
3. erase startup-configuration
4. erase nvram
What is the default encapsulation on poit-to-point links between two Cisco routers?
1. SDLC
2. SLARP
3. HDLC
4. Cisco
5. Ansi
Which of the following provides connection-oriented transport to upper-layer protocols?
1. RIP
2. NLSP
3. SPX
4. NCP
Which command will show you the hostname resolved to the IP address on a router?
1. sh router
2. sh hosts
3. sh ip hosts
4. sh name resolution
Which exec command displays system hardware config information, software version, and the names and sources of config files and boot images on a router?
1. sh flash
2. sh running-config
3. sh version
4. sh config
Which memory in a Cisco router stores packet buffers, ARP cache, and routing tables?
1. Flash
2. RAM
3. ROM
4. NVRAM
In what two modes can the ICMP ping command be used?
1. user
2. privileged
3. global config
4. interface configuration
What is the default encapsulation on an Ethernet interface when enabling Novell?
1. SAP
2. 802.2
3. SNAP
4. Token_SNAP
5. 802.3
6. Ethernet_II
If your routers is working fine with the running-config and you do a copy rus start, but you reboot the router and it goes into setup mode, which of the following could the problem be?
1. Faulty startup-config file
2. Configuration register setting
3. Hardware failure
4. Flash is corrupt
How are dynamic VLANs configured?
1. Statically
2. By an administrator
3. Via a DHCP server
4. Via a VLAN Management Policy Server
How does inter-VLAN communication take place?
1. Using a layer-2 switch
2. Using a router
3. Using a hub
4. Using a repeater
What advantage is offered by LAN segmentation? Choose the best answer.
1. More broadcast can be sent onto the network
2. More bandwidth is provided to each user
3. fewer administrators are needed to run the network
4. More collision domains always means faster network services
If your routing table has a static, a RIP, and an EIGRP route to the same network, which route will be used to route packets?
1. Any available route
2. RIP route
3. Static route
4. EIGRP route
5. They will all load-balance
When is setup mode, which of the following are true? (Choose two)
1. The enable password is encrypted
2. The enable secret is encrypted
3. The enable password is not encrypted
4. The enable secret is not encrypted
What layer of the OSI model would you assume the problem is in if you type show interface serial 0/0 and receive the following message?

Serial 0/0 is a down, line protocol is down
1. Physical layer
2. Data link layer
3. Network layer
4. None; it is a router problem
If you type a command and receive the error "% incomplete command" from a switch CLI, what would you do to get help?
1. Type history to review the error
2. Re-enter the command followed by a question mark to view the ketwords
3. Type help
4. Enter a question mark to see all the console commands
What command is used to stop routing updates from exiting out an interface?
1. Router(config-if)#no routing
2. Router(config-if)#passive-interface
3. Router(config-router)#passive-interface s0/0
4. Router(config-router)#no routing updates
Which command displays all the routed protocols and the interfaces on which each protocol is enabled?
1. show protocols
2. show protocols brief
3. sh interface protocol
4. sh interface
5. sh ip protocols
You type debug ip rip on your router console and see that 172.16.0.0 is being advertised witha metric of 16. What does this mean?
1. The router is 16 hops away
2. The route has a delay of 16 microseconds
3. The route is inaccessible
4. The route is queued at 16 messages a second
Which of the following commands starts the IP processing on a router interface?
1. enable rip
2. network ip_address
3. ip address ip_address netmask
4. reload and restart
What valid host range is the IP address 172.16.10.22 255.255.255.240 a part of ?
1. 172.16.10.20 through 172.16.10.22
2. 172.16.10.17 through 172.16.10.31
3. 172.16.10.16 through 172.16.10.23
4. 172.16.10.16 through 172.16.10.31
5. 172.16.10.17 through 172.16.10.30
What could happen on a network if no loop avoidance schemes are put in place? Choose two
1. Faster convergence time
2. Broadcast stroms
3. Multiple frame copies
4. IP routing will cause flapping on a serial link
Which LAN switch type checks only the hardware address before forwarding a frame?
1. Cut-through
2. Store-and-forward
3. FragmentCheck
4. FragmentFree