SRG CONFIGURATION


SRG#show running-config
Building configuration...

Current configuration : 2038 bytes
!
! Last configuration change at 15:17:49 BST Fri Feb 1 2013
!
version 15.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname SRG
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
clock timezone BST 1 0
!
!
!
!
!
!
!
!
!
!
!
!
ip dhcp pool Swansea
 network 192.168.20.0 255.255.255.0
 default-router 192.168.20.2
!
ip dhcp pool Cardiff
 network 192.168.10.0 255.255.255.0
 default-router 192.168.20.2
!
!
!
no ip domain lookup
ip cef
ipv6 unicast-routing
ipv6 cef
multilink bundle-name authenticated
!
cts logging verbose
!
!
license udi pid CISCO1941/K9 sn FCZ212540C7
!
!
!
redundancy
!
!
!
!
!
!
interface Loopback1
 ip address 192.168.30.1 255.255.255.0
 ip ospf network point-to-point
 ip ospf 1 area 0
!
interface Embedded-Service-Engine0/0
 no ip address
 shutdown
!
interface GigabitEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 ip address 192.168.20.1 255.255.255.0
 ip access-group 10 out
 duplex auto
 speed auto
 ipv6 address FE80::1:1 link-local
 ipv6 address 2001:DB8:ACAD:100::1/64
!
interface GigabitEthernet0/1.10
!
interface GigabitEthernet0/1.19
!
interface GigabitEthernet0/1.20
!
interface Serial0/0/0
 no ip address
 shutdown
 clock rate 2000000
!
interface Serial0/0/1
 ip address 192.168.12.2 255.255.255.252
!
router ospf 1
 passive-interface GigabitEthernet0/1
 network 192.168.12.0 0.0.0.3 area 0
 network 192.168.20.0 0.0.0.255 area 20
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
access-list 10 permit 0.0.0.0
access-list 10 deny   192.168.10.0 0.0.0.255
access-list 10 permit any
!
control-plane
!
!
!
line con 0
 exec-timeout 5 0
 logging synchronous
line aux 0
line 2
 no activation-character
 no exec
 transport preferred none
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
 stopbits 1
line vty 0 4
 exec-timeout 5 0
 privilege level 15
 password vtypassword
 login
 transport input telnet
!
scheduler allocate 20000 1000
!
end




SRG#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       a - application route
       + - replicated route, % - next hop override

Gateway of last resort is not set

O IA  192.168.10.0/24 [110/65] via 192.168.12.1, 00:58:14, Serial0/0/1
      192.168.12.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.12.0/30 is directly connected, Serial0/0/1
L        192.168.12.2/32 is directly connected, Serial0/0/1
      192.168.20.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.20.0/24 is directly connected, GigabitEthernet0/1
L        192.168.20.1/32 is directly connected, GigabitEthernet0/1
      192.168.30.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.30.0/24 is directly connected, Loopback1
L        192.168.30.1/32 is directly connected, Loopback1
SRG#



SRG#show access-lists
Standard IP access list 10
    20 permit 0.0.0.0
    10 deny   192.168.10.0, wildcard bits 0.0.0.255
    30 permit any
SRG#
