#include <16F616.h>
#device ADC=10

#FUSES PUT                   	//Power Up Timer
#FUSES NOMCLR                	//Master Clear pin used for I/O
#FUSES NOPROTECT             	//Code not protected from reading
#FUSES NOBROWNOUT            	//No brownout reset

#use delay(internal=8MHz)
#use rs232(baud=9600,parity=N,xmit=PIN_A4,rcv=PIN_A5,bits=8,stream=PORT1,errors)

#define LED PIN_C0
#define DELAY 500