
Packet Tracer PC Command Line 1.0
C:\>ping 200.100.2.3

Pinging 200.100.2.3 with 32 bytes of data:

Reply from 200.100.1.1: Destination host unreachable.
Request timed out.
Reply from 200.100.1.1: Destination host unreachable.
Reply from 200.100.1.1: Destination host unreachable.

Ping statistics for 200.100.2.3:
    Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),

C:\>
C:\>



R1#show run
Building configuration...

Current configuration : 1587 bytes
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R1
!
!
!
enable secret 5 $1$mERr$hx5rVt7rPNoS4wqbXKX7m0
enable password class
!
!
!
!
!
!
no ip cef
no ipv6 cef
!
!
!
!
license udi pid CISCO2901/K9 sn FTX15240W5J
!
!
!
!
!
!
!
!
!
no ip domain-lookup
!
!
spanning-tree mode pvst
!
!
!
!
!
!
interface GigabitEthernet0/0
 description 200.100.1.1
 ip address 200.100.1.1 255.255.255.0
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 no ip address
 duplex auto
 speed auto
 shutdown
!
interface Serial0/3/0
 description 200.100.12.1
 ip address 200.100.12.1 255.255.255.252
 clock rate 128000
!
interface Serial0/3/1
 description 200.100.13.1
 ip address 200.100.13.1 255.255.255.252
!
interface Vlan1
 no ip address
 shutdown
!
router eigrp 10
 network 200.100.3.0
 network 200.100.13.0 0.0.0.3
 network 200.100.23.0 0.0.0.3
 
!
router ospf 1
 router-id 1.1.1.1
 log-adjacency-changes
 passive-interface GigabitEthernet0/0
 passive-interface GigabitEthernet0/1
 auto-cost reference-bandwidth 128
 network 200.100.3.0 0.0.0.255 area 200.100.13.1
 network 200.100.3.0 0.0.0.255 area 0
 network 200.100.13.0 0.0.0.3 area 0
 network 200.100.23.0 0.0.0.3 area 0
 network 200.100.1.0 0.0.0.255 area 0
 network 200.100.12.0 0.0.0.3 area 0
!
ip classless
!
ip flow-export version 9
!
!
!
banner motd ^CUnauthorised access is prohibited^C
!
!
!
!
line con 0
 password cisco
 logging synchronous
 login
!
line aux 0
!
line vty 0 4
 password cisco
 login
line vty 5 15
 password cisco
 login
!
!
!
end


R1#sh ip int brief 
Interface              IP-Address      OK? Method Status                Protocol 
GigabitEthernet0/0     200.100.1.1     YES manual up                    up 
GigabitEthernet0/1     unassigned      YES unset  administratively down down 
Serial0/3/0            200.100.12.1    YES manual up                    up 
Serial0/3/1            200.100.13.1    YES manual up                    up 
Vlan1                  unassigned      YES unset  administratively down down
R1#

R1#sh ip int brief 
Interface              IP-Address      OK? Method Status                Protocol 
GigabitEthernet0/0     200.100.1.1     YES manual up                    up 
GigabitEthernet0/1     unassigned      YES unset  administratively down down 
Serial0/3/0            200.100.12.1    YES manual up                    up 
Serial0/3/1            200.100.13.1    YES manual up                    up 
Vlan1                  unassigned      YES unset  administratively down down
R1#

R1#sh ip ospf database 
            OSPF Router with ID (200.100.13.1) (Process ID 1)

                Router Link States (Area 0)

Link ID         ADV Router      Age         Seq#       Checksum Link count
200.100.13.1    200.100.13.1    1389        0x80000003 0x00bbe2 3

                Router Link States (Area 200.100.13.1)

Link ID         ADV Router      Age         Seq#       Checksum Link count
200.100.13.1    200.100.13.1    74          0x80000002 0x008b61 0

                Summary Net Link States (Area 200.100.13.1)
Link ID         ADV Router      Age         Seq#       Checksum
200.100.13.0    200.100.13.1    1800        0x80000001 0x00efbc
200.100.1.0     200.100.13.1    1522        0x80000002 0x000ce7
200.100.12.0    200.100.13.1    1384        0x80000003 0x00f6b4
R1#
R1#


R2#show running-config 
Building configuration...

Current configuration : 1325 bytes
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R2
!
!
!
enable secret 5 $1$mERr$hx5rVt7rPNoS4wqbXKX7m0
enable password class
!
!
!
!
!
!
no ip cef
no ipv6 cef
!
!
!
!
license udi pid CISCO2901/K9 sn FTX1524873D
!
!
!
!
!
!
!
!
!
no ip domain-lookup
!
!
spanning-tree mode pvst
!
!
!
!
!
!
interface GigabitEthernet0/0
 description 200.100.2.1
 ip address 200.100.2.1 255.255.255.0
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 no ip address
 duplex auto
 speed auto
 shutdown
!
interface Serial0/3/0
 description 200.100.12.2
 ip address 200.100.12.2 255.255.255.252
!
interface Serial0/3/1
 description 200.100.23.1
 ip address 200.100.23.1 255.255.255.252
 clock rate 2000000
!
interface Vlan1
 no ip address
 shutdown
!
router ospf 1
 router-id 2.2.2.2
 log-adjacency-changes
 passive-interface GigabitEthernet0/0
 auto-cost reference-bandwidth 128
 network 200.100.3.0 0.0.0.255 area 0
 network 200.100.23.0 0.0.0.3 area 0
 network 200.100.13.0 0.0.0.3 area 0
!
ip classless
!
ip flow-export version 9
!
!
!
banner motd ^CUnauthorized access is prohibited^C
!
!
!
!
line con 0
 password cisco
 logging synchronous
 login
!
line aux 0
!
line vty 0 4
 password cisco
 login
line vty 5 15
 password cisco
 login
!
!
!
end


R2#
R2#sh ip int brief 
Interface              IP-Address      OK? Method Status                Protocol 
GigabitEthernet0/0     200.100.2.1     YES manual up                    up 
GigabitEthernet0/1     unassigned      YES unset  administratively down down 
Serial0/3/0            200.100.12.2    YES manual up                    up 
Serial0/3/1            200.100.23.1    YES manual up                    up 
Vlan1                  unassigned      YES unset  administratively down down
R2#
R2#sh ip route 
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

     200.100.2.0/24 is variably subnetted, 2 subnets, 2 masks
C       200.100.2.0/24 is directly connected, GigabitEthernet0/0
L       200.100.2.1/32 is directly connected, GigabitEthernet0/0
     200.100.12.0/24 is variably subnetted, 2 subnets, 2 masks
C       200.100.12.0/30 is directly connected, Serial0/3/0
L       200.100.12.2/32 is directly connected, Serial0/3/0
     200.100.23.0/24 is variably subnetted, 2 subnets, 2 masks
C       200.100.23.0/30 is directly connected, Serial0/3/1
L       200.100.23.1/32 is directly connected, Serial0/3/1

R2#
R2#sh ip ospf database 
            OSPF Router with ID (2.2.2.2) (Process ID 1)

                Router Link States (Area 0)

Link ID         ADV Router      Age         Seq#       Checksum Link count
2.2.2.2         2.2.2.2         1256        0x80000001 0x001ba8 1
R2#


R3#sh run
Building configuration...

Current configuration : 1073 bytes
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname R3
!
!
!
enable secret 5 $1$mERr$hx5rVt7rPNoS4wqbXKX7m0
enable password class
!
!
!
!
!
!
no ip cef
no ipv6 cef
!
!
!
!
license udi pid CISCO2901/K9 sn FTX15243999
!
!
!
!
!
!
!
!
!
no ip domain-lookup
!
!
spanning-tree mode pvst
!
!
!
!
!
!
interface GigabitEthernet0/0
 description 200.100.3.1
 ip address 200.100.3.1 255.255.255.0
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 no ip address
 duplex auto
 speed auto
 shutdown
!
interface Serial0/3/0
 description 200.100.13.2
 ip address 200.100.13.2 255.255.255.252
 clock rate 128000
!
interface Serial0/3/1
 description 200.100.23.2
 ip address 200.100.23.2 255.255.255.252
!
interface Vlan1
 no ip address
 shutdown
!
ip classless
!
ip flow-export version 9
!
!
!
banner motd ^CUnauthorized acces is prohibited^C
!
!
!
!
line con 0
 password cisco
 logging synchronous
!
line aux 0
!
line vty 0 4
 password cisco
 login
line vty 5 15
 password cisco
 login
!
!
!
end


R3#
R3#sh ip int brief 
Interface              IP-Address      OK? Method Status                Protocol 
GigabitEthernet0/0     200.100.3.1     YES manual up                    up 
GigabitEthernet0/1     unassigned      YES unset  administratively down down 
Serial0/3/0            200.100.13.2    YES manual up                    up 
Serial0/3/1            200.100.23.2    YES manual up                    up 
Vlan1                  unassigned      YES unset  administratively down down
R3#
R3#sh ip route 
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

     200.100.3.0/24 is variably subnetted, 2 subnets, 2 masks
C       200.100.3.0/24 is directly connected, GigabitEthernet0/0
L       200.100.3.1/32 is directly connected, GigabitEthernet0/0
     200.100.13.0/24 is variably subnetted, 2 subnets, 2 masks
C       200.100.13.0/30 is directly connected, Serial0/3/0
L       200.100.13.2/32 is directly connected, Serial0/3/0
     200.100.23.0/24 is variably subnetted, 2 subnets, 2 masks
C       200.100.23.0/30 is directly connected, Serial0/3/1
L       200.100.23.2/32 is directly connected, Serial0/3/1

R3#
