BR1#show running-config
Building configuration...

Current configuration : 2082 bytes
!
! Last configuration change at 11:26:27 UTC Fri Dec 15 2017
version 15.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BR1
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
!
ip cef
!
!
!
!
ip dhcp pool BR1G1
 network 192.168.10.0 255.255.255.0
 default-router 192.168.10.1
 domain-name ccna-lab.com
 lease 2
!
!
!
no ip domain lookup
ipv6 unicast-routing
ipv6 cef
!
multilink bundle-name authenticated
!
!
!
!
license udi pid CISCO2901/K9 sn FCZ182293KC
!
!
!
redundancy
!
!
!
!
!
!
!
!
!
!
!
!
!
!
interface Loopback45
 ip address 172.16.45.1 255.255.255.0
!
interface Loopback46
 ip address 172.16.46.1 255.255.255.0
!
interface Loopback47
 ip address 172.16.47.1 255.255.255.0
!
interface Loopback48
 ip address 172.16.48.1 255.255.255.0
!
interface Embedded-Service-Engine0/0
 no ip address
 shutdown
!
interface GigabitEthernet0/0
 ip address 192.168.10.1 255.255.255.0
 ip helper-address 192.168.10.1
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 no ip address
 duplex auto
 speed auto
 ipv6 address FE80::1 link-local
 ipv6 address 2201:DB8:ACAD:1::2/64
 ipv6 eigrp 1
!
interface Serial0/0/0
 ip address 2.1.1.1 255.255.255.252
 ip ospf message-digest-key 1 md5 p@ssword
 clock rate 128000
!
interface Serial0/0/1
 no ip address
 ipv6 address FE80::1 link-local
 ipv6 address 2001:DB8:ACAD:12::2/64
 ipv6 eigrp 1
 clock rate 128000
!
router ospf 1
 router-id 22.22.22.22
 auto-cost reference-bandwidth 10240
 passive-interface default
 no passive-interface Serial0/0/0
 no passive-interface Serial0/0/1
 network 2.1.1.0 0.0.0.3 area 0
 default-information originate
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
ipv6 router eigrp 1
 eigrp router-id 1.1.1.1
!
!
!
!
control-plane
!
!
!
line con 0
 logging synchronous
line aux 0
line 2
 no activation-character
 no exec
 transport preferred none
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
 stopbits 1
line vty 0 4
 login
 transport input all
!
scheduler allocate 20000 1000
!
end

BR1#show ip int bri
Interface                  IP-Address      OK? Method Status                Protocol
Embedded-Service-Engine0/0 unassigned      YES unset  administratively down down
GigabitEthernet0/0         192.168.10.1    YES manual up                    up
GigabitEthernet0/1         unassigned      YES unset  up                    up
Serial0/0/0                2.1.1.1         YES manual up                    up
Serial0/0/1                unassigned      YES unset  up                    up
Loopback45                 172.16.45.1     YES manual up                    up
Loopback46                 172.16.46.1     YES manual up                    up
Loopback47                 172.16.47.1     YES manual up                    up
Loopback48                 172.16.48.1     YES manual up                    up
BR1#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP
       + - replicated route, % - next hop override

Gateway of last resort is 2.1.1.2 to network 0.0.0.0

O*E2  0.0.0.0/0 [110/1] via 2.1.1.2, 00:51:28, Serial0/0/0
      2.0.0.0/8 is variably subnetted, 3 subnets, 2 masks
C        2.1.1.0/30 is directly connected, Serial0/0/0
L        2.1.1.1/32 is directly connected, Serial0/0/0
O IA     2.1.1.4/30 [110/7632] via 2.1.1.2, 00:44:01, Serial0/0/0
      172.16.0.0/16 is variably subnetted, 8 subnets, 2 masks
C        172.16.45.0/24 is directly connected, Loopback45
L        172.16.45.1/32 is directly connected, Loopback45
C        172.16.46.0/24 is directly connected, Loopback46
L        172.16.46.1/32 is directly connected, Loopback46
C        172.16.47.0/24 is directly connected, Loopback47
L        172.16.47.1/32 is directly connected, Loopback47
C        172.16.48.0/24 is directly connected, Loopback48
L        172.16.48.1/32 is directly connected, Loopback48
      192.168.10.0/24 is variably subnetted, 2 subnets, 2 masks
C        192.168.10.0/24 is directly connected, GigabitEthernet0/0
L        192.168.10.1/32 is directly connected, GigabitEthernet0/0
BR1#show ipv6 int bri
Em0/0                  [administratively down/down]
    unassigned
GigabitEthernet0/0     [up/up]
    unassigned
GigabitEthernet0/1     [up/up]
    FE80::1
    2201:DB8:ACAD:1::2
Serial0/0/0            [up/up]
    unassigned
Serial0/0/1            [up/up]
    FE80::1
    2001:DB8:ACAD:12::2
Loopback45             [up/up]
    unassigned
Loopback46             [up/up]
    unassigned
Loopback47             [up/up]
    unassigned
Loopback48             [up/up]
    unassigned
BR1#show ipv6 route
IPv6 Routing Table - default - 6 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
       B - BGP, R - RIP, H - NHRP, I1 - ISIS L1
       I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary, D - EIGRP
       EX - EIGRP external, ND - ND Default, NDp - ND Prefix, DCE - Destination
       NDr - Redirect, O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF ext 1
       OE2 - OSPF ext 2, ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2
D   2001:DB8:ACAD:A::/64 [90/2170112]
     via FE80::3, Serial0/0/1
C   2001:DB8:ACAD:12::/64 [0/0]
     via Serial0/0/1, directly connected
L   2001:DB8:ACAD:12::2/128 [0/0]
     via Serial0/0/1, receive
C   2201:DB8:ACAD:1::/64 [0/0]
     via GigabitEthernet0/1, directly connected
L   2201:DB8:ACAD:1::2/128 [0/0]
     via GigabitEthernet0/1, receive
L   FF00::/8 [0/0]
     via Null0, receive
BR1#show ipv6 eigrp topology
EIGRP-IPv6 Topology Table for AS(1)/ID(1.1.1.1)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
       r - reply Status, s - sia Status

P 2201:DB8:ACAD:1::/64, 1 successors, FD is 2816
        via Connected, GigabitEthernet0/1
P 2001:DB8:ACAD:A::/64, 1 successors, FD is 2170112
        via FE80::3 (2170112/2816), Serial0/0/1
P 2001:DB8:ACAD:12::/64, 1 successors, FD is 2169856
        via Connected, Serial0/0/1

BR1#show ipv6 eigrp neighbors
EIGRP-IPv6 Neighbors for AS(1)
H   Address                 Interface              Hold Uptime   SRTT   RTO  Q  Seq
                                                   (sec)         (ms)       Cnt Num
0   Link-local address:     Se0/0/1                  11 00:32:59   13   100  0  4
    FE80::3
BR1#
*Dec 15 11:35:39.707: %IP-3-LOOPPAK: Looping packet detected and dropped -
src=192.168.10.2, dst=192.168.10.1, hl=20, tl=78, prot=17, sport=137, dport=137
in=GigabitEthernet0/0, nexthop=192.168.10.1, out=GigabitEthernet0/0
options=none -Process= "IP Input", ipl= 0, pid= 122
-Traceback= 30128828z 30129B00z 3012AE58z 3012B330z 3012B89Cz 322CB92Cz 322CBA70z 322C813Cz 3010F724z 3012CEF8z 30111298z 301114D8z 301115B8z 301117D0z 32CCB7A0z 32CCB784z
BR1#